ZTR 29er Race Gold Wheelset -  The best just got better!

The ZTR 29er Race wheelset changed the way people look at 29ers. Now get the wheelset that sets the Gold Standard. The new 29er Race Gold wheelset uses the same rim technology as the Race 7000 wheelset that propelled Sabine Spitz to 2008 Olympic Gold.
The improved rim design provides a wider tire base for more stability and traction, a lower sidewall for increased usable air volume, and lighter weight. Stan's New 3.30 Ti hubs with stainless bearings increase reliability and provide quicker engagement to maximize pedaling efficiency.
No longer be held back by heavier wheels. With 320 gram rims and Stan’s 3.30 Ti hubs laced to maximize lateral stiffness and rim longevity, the 29er Race Gold wheelset is the unquestioned leader of the lightweight racing category.

SPEC:    
Total Weight           1345 grams
Max rider weight      170lbs
Rims                      ZTR 29er Race Gold BSTTM Disc
Rim Material            6061 Alloy
Rim Depth               15.6mm
Rim Width External    24.2mm
Rim Width Internal    21.3mm
Front Hub               Stan's 3.30 Ti or Cannondale Lefty
Rear Hub                Stan's 3.30Ti or 3.30SS
Hub Bearings           Stainless Cartridge
Spokes                   1.8/1.5 DT Revolution Black
Nipples                   Silver Alloy
Front Spoke Lacing   32H, 2 Cross
Rear Spoke Lacing    32H, 3 Cross ND Side, 2 Cross D Side

   
Featuring BSTTM (Bead Socket Technology)
Shimano and SRAM 8/9/10 speed compatible
Yellow tape and valves installed

Additional information

The ZTR 29er Race Gold is a low pressure rim and it must be run at pressures of 15-33 psi. Higher pressures may cause damage to the rim and will not be covered in the warranty.

If you prefer to run high pressures, please consider purchasing a different rim from the ZTR product line.
Designed to work with standard tube-type tires using just the yellow tape and valves for tubeless without burping.
The ZTR 29er Race Gold rim is designed such that standard tires will inflate easily on this rim when setup tubeless.

Some tires will mount with a little more difficulty but keep the beads centered in the rim cavity and refer to this video for further detail.
UST and Tubeless Ready tires may be difficult to mount on this rim.
Can be used with tubes